The reasons of fever phenomenon when ball mill working
Author : RuiGuang Time : 2013-12-03 Click :
When the ball mill is working , if you find the ball Mill machine fever phenomenon, we should note, as in the case of more serious heat might reduce Mo ball inside the worm and worm wear , thus making the internal wear parts are also accelerated. So when the operating staff must pay special attention to the situation found to have severe fever when , immediately shut down the reasons for exclusion timely processing of work.The reason that caused the ball mill body 's fever phenomenon are:
First, the worm , the worm is not a good engagement , excessive wear it. Bearing damage or the gap is too large, the cause of foreign matter into the ;
Secondly, the body is overloaded carriage in operation , and lubrication is not good, too much or too little oil , oil well or inappropriate, excessive seal friction and transmission output shaft connected to improper reasons ;
Third, seal damage, broken seals , excessive fuel, oil Cesson off the oil standard damage and other reasons ;
Fourth, in terms of a fixed gear is not a good situation , worm , bearings damaged or excessive consumption of Mo , do not tighten the bolts at a fixed place, resulting in loose foreign material from entering other reasons .
Welcom to our website http://www.cnballmill.com/ for more information.