Pay attention to in vibrating screen maintenance
Author : RuiGuang Time : 2014-01-13 Click :
In the mining process, vibrating screen is a kind of screening equipment exists everywhere, whether it is prepared to take gravel, or extract valuable ore raw materials, are inseparable from the shaker selection process. The following summarizes some of the considerations when several vibration screening repair, hope to attract everyone's attention. 1. When a demolition with precision fit parts, should be especially careful to protect the surface of these parts, to prevent damage and dirt;
Disassembled parts of the surface if it is easy to rust, must be well protected or coated with anti-rust oil;
2, the demolition of a support surface and parts machined surface, wood should be laid on the ground, after finishing the surface and prevent direct contact with the ground;
3, when handling parts, does not allow direct knock needs pad pad copper or corresponding parts with a hammer.
4, when the bearing is damaged, replace both bearings together.
5, the replacement of "O"-ring groove after oiled rolled, not its stretch.
6, when installing a new screen, the hook must be on the screen and the screen box bearing cages firm contact angles or channel, and evenly tensioned.
7, before assembling the various parts must be cleaned and upstream.
8, for lifting living demolished parts of lifting equipment, should have sufficient lifting capacity.
Ruiguang produces high frequency screen works differently from ordinary screening equipment, due to work at high frequencies, due to the destruction of the surface tension of pulp and fine-grained material in the screen surface speed oscillation, accelerated the useful minerals and mineral useless Analysis from the role, increasing the probability of a particle size smaller than the separation of materials in contact with the sieve. Improve the screening efficiency, to achieve a better screening effect.
http://www.cnballmill.com/